FireAngel Optical Smoke Alarm with 5 Year Replaceable Batteries, FA6615-R (ST-625 replacement, new gen)

Product Information

Traditionally ionisation alarms were used to detect all types of fire (although often prone to false alarms due to sensitivity), however they are currently being phased out in the industry due to their environmental impact. However, a secondary product of a fast-flaming fire is heat. This is where Thermoptek multi-sensor technology provides enhanced detection. What is a Thermoptek smoke alarm? FireAngel heat alarms have been specifically designed for areas with fumes and high humidity such as kitchens, where cooking fumes are present, and attics or garages where there is lots of dust. Option of linking to a gateway to enable smart features such as easy testing of alarms and updates of status whilst away from the home

Thermoptek technology provides a much faster alert to danger in comparison to non-Thermoptek alarms, giving residents more time to escape from a property should a fire occur. Identifying a need for enhanced protection All FireAngel multi-sensor alarms include a sealed for life battery and low profile aesthetic design. Designed for easy installation, Pro Connected Thermoptek alarms are suitable for use in hallways, landings, bedrooms, living rooms and dining rooms.Heat Alarms (Kitchen Alarms): Heat alarms are the only alarm suitable for use within the kitchen as they’re not affected by cooking fumes like traditional smoke alarms. Over 60 Percent of fires start in the kitchen, with cooking and faulty white goods (fridges and tumble driers) being the main causes. FireAngel recommend a heat alarm is fitted in the kitchen, but you can also fit additional heat alarms in the garage and loft to protect these areas. We recommend a heat alarm is fitted in the kitchen, but you can also fit additional heat alarms in the garage and loft to protect these areas. British Standard BS 5839-6:2019 also recommends the installation of multi-sensor smoke alarm technology throughout a home. The unit comes with a sealed for life, tamper proof lithium battery. The sensor within the unit will deteriorate after 10 years, so to ensure you’re protected we recommend you replace the unit after this time. Our FA6611-R and FA6615-R alarms will require a new MP7 baseplate installed when replacing any end of life alarms. Key features of our new range

All optical smoke alarms sold in the UK need to comply to the European standard BS EN 14604 and must pass five live fire tests which measure how an alarm performs in different types of smoke. All our alarms are subject to third-party testing and certification, giving you peace of mind protection. Our FA6615-R optical smoke alarm is certified to the European Standard EN 14604. Known as the ‘Silent Killer’, CO occurs when fuels burn incompletely, with common sources being boilers, gas fires and hobs and solid fuel burners. However, carbon monoxide can also pass through walls, so you would also be at risk if a neighbouring property had a leak. If you live in Scotland find out more about the law in your area on our blog post here. (link to homeowner Scottish regulations blog) This alarm features optical sensing technology, is certified to the European Standard EN 14604 and is perfect for landings, hallways and bedrooms.

All our alarms are subject to third-party testing and certification, giving you peace of mind protection. Our FA6720-R Heat Alarm is certified to the British Standard BS5446. Our new heat alarm features Thermistor heat sensing technology to ensure you’re alerted to fires without the false reactions to cooking fumes. For faster detection, search for FireAngel Thermistek. Suitable for homes in England and Wales, as well as Scotland when installed following the detail set out in the new fire & CO regulations You can keep your family protected from hidden dangers too with Fireangel carbon monoxide alarms - they're also rigorously tested and come with innovative safety features so you can rest with peace of mind. Fireangel interlinked smoke alarm

FireAngel recommend a CO alarm is installed between 1 m and 3 m away from each fuel-burning appliance, as well as installing additional units in areas such as living rooms and bedrooms where you spend most time whilst at home. Get protected today Noise identification – When interlinked, each unit will sound a different sound pattern depending on the triggering alarm whether smoke, heat or carbon monoxide We’ve made testing at home all the easier, with a large, central test button and the ability to easily silence known false alarms to 10-minutes giving you time to waft away the smell of burnt toast and return to peace and quiet once again.It’s important to remember that the sensors in all smoke alarms deteriorate after time, at FireAngel we recommend that smoke alarms are replaced every 10 years.